1U IP DSLAM with AC/DC Power
ies-1000
ADSL2+ Line Card
aam1212-51/53
G.SHDSL Line Card
sam1008
G.SHDSL.bis Line Card
sam1216-22
AAM1212-53
• One Telco 50 connectors for 12-port
ADSL/ADSL2/ADSL2+ and splitter card over ISDN
• One mini RJ11 console port for local management
• Two 10/100Base-TX for uplink
• DELT (Dual Ended Loop Test)
• SELT (Single End Loop Tets)
• Power enhancement or ADSL power saving mode
• Rate adaptation
• Status LEDs: System Status, Ethernet 1 and 2 Link
Status, Ethernet 1 and 2 Active Status, ADSL ports
status, Alarm
• ADSL Compliance
- DMT T1.413, issue 2
- G.DMT (ITU G.992.1)
- G.LITE (ITU G.992.2)
- G.HS (ITU G.994.1)
- Auto-negotiating rate adaptation
- ADSL2: G.992.3 Annex B
- ADSL2+: G.992.5 Annex B
SAM1008
• One console port: Mini-RJ-11 (4P4C)
• One Ethernet port: RJ45 10/100 Mbps
• 8-port G.SHDSL- RJ-11 connector
• Status LEDs: System Status, Ethernet Link Status,
Ethernet Active Status, G.SHDSL ports status,
Alarm
• Compliant with ITU-T G.991.2
• TC-PAM modulation
• Transmission rate: 192 k ~ 2.3 Mbps, 64 kbps
increments over single copper pair
• All front access
• Hot-swappable
SAM1216-22
• One Telco 50 connectors for 16-port G.SHDSL.bis
• One mini RJ11 console port for local management
• Two 10/100Base-TX for uplink
• In-band Ethernet management
• Status LEDs: System Status, Ethernet Link Status,
Ethernet Active Status, G.SHDSL.bis ports status,
Alarm
• Line coding: TC-PAM
• Transmit power: up to 16.8 dBm
• Density: 16 ports per chip
• SHDSL payload format: ATM
• Rate Adaptation Mode: fixed, line probing
• Up to 4096 kbps in single pair, m-pairs (2/4 pairs
mode) bonding support up to 16.384 Mbps
• Annex A and annex B PSD mask
• SHDSL line profile
• SHDSL alarm profile
• Power backoff
• Standard Compliant
- ETSI SDSL (ETSI TS 101 524 V 1.2.1)
- ITU G.shdsl (ITU-T G.991.2 (2001))
- ITU G.shdls.bis (ITU-T G.991.2 (2004))
- RFC4319 (formerly RFC3276) SHDSL Line MIB
Physical Specifications
IES-1000M
• Dimensions: 440 (W) x 320 (D) x 46 (H) mm
• Weight: 3.7 Kg
AAM1212-51
• Dimensions: 170 (W) x 320 (D) x 35 (H) mm
• Weight: 0.9 Kg
AAM1212-53
• Dimensions: 170 (W) x 320 (D) x 35 (H) mm
• Weight: 0.9 Kg
SAM1008
• Dimensions: 170 (W) x 320 (D) x 35 (H) mm
• Weight: 0.9 Kg
SAM1216-22
• Dimensions: 170 (W) x 320 (D) x 35 (H) mm
• Weight: 0.9 Kg
Environmental Specifications
• Operating Temperature: 0°C ~ 50°C
• Storage temperature: -40°C ~ 70°C
• Operating Humidity: 10% ~ 90%
(non-condensing)
• Storage Humidity: 10% ~ 95%
(non-condensing)
• Power supply (AC/DC)
- AC Power: 100 ~ 240 VAC, 50 ~ 60 Hz
- DC Power: -36 ~ -72 V DC
• Power consumption
- AAM1212-51: 25 W
- AAM1212-53: 25 W
- SAM1008: 8.59 W
- SAM1216-22: 25 W
Certification
• Safety
- UL 60950-1
- CSA 60950-1
- EN60950-1
- IEC 60950-1
• EMC
- FCC Part 15B Class A
- EN55022 Class A
- EN55024 Class A
- ETSI 300 386
• Reliability
- ETSI 300 019
• Telecom
- ITU-T K20
To Next Page
Loading...
