1/2 Copyright © 2016 ZyXEL Communications Corp. All Rights Reserved
Quick Start Guide
LTE4506
4G LTE-A HomeSpot
See the User's Guide at www.zyxel.com for more information, including customer support and safety warnings.
1
Make sure the LTE4506 is turned off. On the bottom of the LTE4506,
open the cover of the micro SIM card slot.
Hardware Installation
1
1
1
Gently push the SIM card into the SIM card slot. Put the cover back
in place.
Note: Please do NOT use a nano-SIM to micro-SIM card adapter to
avoid slot pin damage.
Select the type of plug used in your country. Insert the plug in the
micro USB power adaptor until you hear a "click".
Use the included power adaptor (that has an output of 5V at 1.5A
or higher current) to connect the LTE4506 micro USB port to an
appropriate power outlet. Press the power button to turn it on.
LTE4506 Wi-Fi is enabled by default. To disable or enable it again,
press the Wi-Fi button on the top of the LTE4506 for one second.
To initiate WPS to set up a secure Wi-Fi connection
between the LTE4506 and a wireless client, press the
Wi-Fi button on the top of the LTE4506 for longer than
five seconds.
Use an Ethernet cable to connect a computer to the Ethernet port
of the LTE4506 for initial configuration or Internet access.
6
POWER ON
SSID1: ZyXEL_“last four digits
of the MAC address”
Key: XXXXXXXXX
Key: XXXXXXXXX
SSID2: ZyXEL_“last four digits
of the MAC address”_5G
2
3
4
1
5
1
6
Insert SIM Card into slot
Bottom
RESET
SIM
Press for 1 Second: Turn On Wi-Fi
> 5 Seconds: WPS ON
Optional
3
1
2
4
6
5