Need help?Do you have a question about the ZyXEL Communications LTE4506-M606 and is the answer not in the manual?
General| DSL WAN | No |
|---|---|
| Ethernet WAN | Yes |
| Security algorithms | SSID, WPA, WPA2, WPA2-PSK |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| WLAN data transfer rate (max) | 300 Mbit/s |
| Device type | Cellular network router |
| Product type | Portable router |
| Product color | Grey, White |
| LED indicators | LAN, WLAN |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| Ethernet LAN (RJ-45) ports | 1 |
| 4G standard | LTE |
| 2G standards | EDGE, GPRS, GSM |
| 3G standards | DC-HSDPA, DC-HSPA+, HSPA+, HSUPA, UMTS |
| 4G bands supported | 700, 800, 900, 1800, 2100, 2300, 2600 MHz |
| GSM bands supported | 900, 1800 MHz |
| UMTS bands supported | 900, 2100 MHz |
| Output current | 1.5 A |
| Output voltage | 5 V |
| Power source type | USB |
| Storage temperature (T-T) | -25 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Antennas quantity | 2 |
Weight and Dimensions| Width | 66.8 mm |
|---|---|
| Height | 110.5 mm |
| Weight | 150 g |
Explains how to manage the LTE4506 using its embedded Web Configurator.
Details hardware connection steps and SIM card insertion requirements for the LTE4506.
Details the procedure to reset the LTE4506 to its factory default settings using the reset button.
Introduces the web interface, covers login account details and access steps.
Explains the structure of the web interface, including the title bar and navigation panel.
Guides through initial setup of Internet and WiFi connections using the wizard.
Screen to view and change LTE4506's Internet access settings and status.
Screen to view or configure connection profiles (APN, username, password).
Screen to enable wireless LAN, set SSID, and select security mode for WiFi.
Screen to view or configure the management IP address for the LTE4506's LAN interface.
Screen to enable the built-in DHCP server and assign IP addresses to connected devices.
Screen to configure IPv4/Port filtering rules for the firewall to control traffic.
Screen to configure port forwarding rules to allow external access to internal services.
Screen to activate protection against Denial of Service (DoS) attacks.
Screen to set the domain name and change the system password for security.
Screen to backup, restore, or reset device configurations to factory defaults.
Screen to upload new firmware to the LTE4506 for updates and performance improvements.
Troubleshooting steps for when the LTE4506 does not turn on or show LEDs.
Troubleshooting for issues related to accessing and logging into the device's web interface.
Troubleshooting for problems with accessing the Internet via the 3G/4G wireless WAN connection.
Troubleshooting for issues with accessing the LTE4506 or pinging from the WLAN.
To Next Page