Chapter 6 Router
LTE4506 User’s Guide
70
Figure 46 Remote Management From the WAN
Use the following screen to enable remote management from the WAN on the LTE4506. To access this
screen, click Router > Remote management.
Figure 47 Router > Remote management
The following table describes the labels in this screen.
6.18 Telnet Screen
You can use Telnet to access the LTE4506 by enabling access via LAN and WAN.
To access this screen, click Router > Telnet to configure your LTE4506 for remote Telnet access.
Table 37 Router > Remote management
LABEL DESCRIPTION
Remote management
https port Select the check box to enable access to the LTE4506 using HTTPS service. Enter the service port
number for accessing the LTE4506 using this service.
Apply Click this button to save your changes back to the LTE4506.
Reset Click Reset to reload the previous configuration for this screen.
To Next Page
Loading...
