Chapter 1 Introduction
LTE4506 User’s Guide
11
• Change the password often. Use a password that is not easy to guess and that consists of different
types of characters, such as numbers and letters.
• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it). Restoring an earlier working
configuration may be useful if the device becomes unstable or even crashes. If you forget your
password, you will have to reset the LTE4506 to its factory default settings. If you backed up an earlier
configuration file, you will not have to totally re-configure the LTE4506; you can simply restore your last
configuration.
1.4 Hardware Connections
See your Quick Start Guide for information on making hardware connections. You need to insert a SIM
card to the SIM card slot at the bottom of the LTE4506 before you can use it.
1.5 Turn On or Off the LTE4506
To turn on the device, press the power button and hold until any of the LED lights turns on.
To turn off the device, press the power button and hold until all the LED lights are off.
Figure 1 LTE4506 Power Button
1.6 LEDs
You can check the LED lights to see the 2G/3G/4G connection status, signal strength, and the wireless
connection status.
To Next Page
Loading...
