Chapter 4 Internet
LTE4506 User’s Guide
32
The following table describes the labels in this screen.
4.5 Network Selection Screen
This screen allows you to view available Public Land Mobile Networks (PLMNs) and select your preferred
network when the LTE4506 is outside the geographical coverage area of the network to which you are
registered and roaming is enabled.
Click Internet > Network Selection. The screen appears as shown next.
Figure 18 Internet > Network Selection
Table 13 Internet > APN Configuration
LABEL DESCRIPTION
Select APN
Profile
Select Auto to reload the default profile. Otherwise, select Manual to configure a connection
profile.
APN This field displays the Access Point Name (APN) in the profile.
Enter the Access Point Name (APN) provided by your service provider. Connections with
different APNs may provide different services (such as Internet access or MMS (Multi-Media
Messaging Service)) and charging method.
You can enter up to 30 printable ASCII characters. Spaces are allowed.
Username This field displays the user name in the profile.
Type the user name (of up to 31 printable ASCII characters) given to you by your service
provider.
Password This field displays the password in the profile.
Type the password (of up to 31 printable ASCII characters) associated with the user name
above.
APN Method Select the type of authentication method peers use to connect to the LTE4506 in LTE
connections.
In Password Authentication Protocol (PAP) peers identify themselves with a user name and a
password. In Challenge Handshake Authentication Protocol (CHAP) additionally to user names
and passwords the LTE7460-M608 sends regular challenges to make sure an intruder has not
replaced a peer. Otherwise you can select Auto or None.
Apply Click Apply to save your changes back to the LTE4506.
Reset Click Reset to reload the previous configuration for this screen.
To Next Page
Loading...
