Chapter 5 Wi-Fi
LTE4506 User’s Guide
42
5.5 WPS Screen
Use this screen to configure Wi-Fi Protected Setup (WPS) on your LTE4506.
WPS allows you to quickly set up a wireless network with strong security, without having to configure
security settings manually. Set up each WPS connection between two devices. Both devices must
support WPS. See Section 5.6.5.3 on page 50 for more information about WPS.
Note: To use the WPS feature, make sure you have wireless enabled in the Wi-Fi > Wi-Fi
Settings screen.
Note: If you want to use the WPS feature set the security type to WPA or None.
Click Wi-Fi > WPS. The following screen displays.
Figure 24 Wi-Fi > WPS
The following table describes the labels in this screen.
Apply Click Apply to save your changes back to the LTE4506.
Reset Click Reset to reload the previous configuration for this screen.
Table 18 Wi-Fi > MAC Filter (continued)
LABEL DESCRIPTION
Table 19 Wi-Fi > WPS
LABEL DESCRIPTION
Select WPS
Interface
Select SSID 1 (or SSID 2) to configure WPS.
To Next Page
Loading...
