Chapter 3 Home
LTE4506 User’s Guide
25
Figure 10 Setup Wizard > Set Up Internet: Connection Mode
Specify limiting the amount of the package data and reminding the percentage of the package data
usage. Click Next to configure the WiFi settings.
Figure 11 Setup Wizard > Set Up Internet: Package Data Limit
3.3.2 WiFi
If you have not enabled the Wi-Fi 1 network, this screen shows the WiFi 1 and WiFi 2 network status. Click
the button of a WiFi network to enable it. Click Next to go to the next step.
To Next Page
Loading...
