Chapter 4 Internet
LTE4506 User’s Guide
30
4.3 PIN Settings Screen
Use this screen to turn on or turn off PIN code authentication on the inserted SIM card. Click Internet >
PIN Settings. The screen appears as shown next.
Figure 16 Internet > PIN Settings
Allow Data
Roaming
Select this check box to enable data roaming on the LTE4506.
4G roaming is to use your mobile device in an area which is not covered by your service
provider. Enable roaming to ensure that your LTE4506 is kept connected to the Internet when
you are traveling outside the geographical coverage area of the network to which you are
registered.
Cellular Network
Mode
Select the type of the network (4G Mode, 3G Mode, or 2G Mode) to which you want the LTE4506
to connect and click Apply to save your settings.
Otherwise, select Auto to have the LTE4506 connect to an available network using the default
settings on the SIM card. If the currently registered mobile network is not available or the mobile
network’s signal strength is too low, the LTE4506 switches to another available mobile network.
Internet
Connection
Method
Select Always to connect to the mobile network automatically if there is an available mobile
network. Select On Demand to connect to the mobile network automatically only when a
connected client wants to access the Internet. Otherwise, select Manual.
LTE Band
Selection
Select the LTE frequency bands provided by your ISP.
Disconnect in Specifies the period of time the user can be idle before he/she is disconnected.
Apply Click Apply to save your changes back to the LTE4506.
Reset Click Reset to reload the previous configuration for this screen.
Table 11 Internet > Internet Status (continued)
LABEL DESCRIPTION
To Next Page
Loading...
