Need help?Do you have a question about the ZyXEL Communications NBG-418N v2 and is the answer not in the manual?
General| Ethernet LAN | Yes |
|---|---|
| Cabling technology | 10/100Base-T(X) |
| Networking standards | - |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Wi-Fi band | Single-band (2.4 GHz) |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| WLAN data transfer rate (max) | 300 Mbit/s |
| USB port | No |
| Ethernet LAN (RJ-45) ports | 4 |
| Security algorithms | 64-bit WEP, 128-bit WEP, WPA-PSK, WPA2-PSK |
| Product type | Tabletop router |
| Product color | Black |
| LED indicators | Power, WAN, WLAN, WPS |
| Input current | 1 A |
| Input voltage | 5 V |
| Package depth | 74 mm |
| Package width | 270 mm |
| Package height | 164 mm |
| Package weight | 426 g |
| Number of products included | 1 pc(s) |
| Storage temperature (T-T) | -30 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 10 - 95 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Safety | CE LVD, BSMI |
| Certification | CE, FCC, IC, BSMI |
| WAN connection type | RJ-45 |
| Antennas quantity | 2 |
| Antenna gain level (max) | 5 dBi |
| Cables included | LAN (RJ-45) |
| Power source type | DC |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 102 mm |
|---|---|
| Width | 142 mm |
| Height | 23 mm |
| Weight | 148 g |
Provides a general overview of the NBG-418N v2's capabilities and connectivity options.
Details essential steps to enhance the security and manage the NBG-418N v2 effectively.
Explains the functionality of the WPS/RESET button for secure wireless setup and device reset.
Introduces the NBG-418N v2's Web Configurator interface and its features.
Guides users on how to connect to and log into the NBG-418N v2's web-based management interface.
Explains the procedure for resetting the NBG-418N v2 to its factory default settings.
Outlines the steps for configuring the device to access the Internet using the setup wizard.
Explains the different device operation modes: Router, Access Point, and Universal Repeater.
Provides instructions on how to set or revert the device to its default Router mode.
Details the steps required to configure the NBG-418N v2 to operate as an Access Point.
Explains how to set up the device in Universal Repeater mode to extend wireless coverage.
Introduces the tutorials available for configuring the NBG-418N v2 and its features.
Guides users on setting up wireless security using the WPS feature.
Explains how to manually configure wireless security settings without using WPS.
Details how to configure and manage multiple SSIDs for separate wireless networks.
Explains how to manage network bandwidth and prioritize traffic for better performance.
Introduces the chapter on configuring wireless network settings for the NBG-418N v2.
Discusses different types of wireless encryption (WEP, WPA-PSK, WPA2-PSK) for data protection.
Explains Wi-Fi Protected Setup for easy and secure wireless network setup.
Covers the setup of WPA-PSK and WPA2-PSK for strong wireless security.
Details how to manage WPS settings, generate PIN, and check WPS status.
Guides on adding wireless stations using WPS for secure connection.
Introduces the WAN screens for configuring internet access on the NBG-418N v2.
Introduces the chapter on configuring LAN settings for the NBG-418N v2.
Describes how to change basic LAN settings, including the IP address.
Introduces the Dynamic Host Configuration Protocol (DHCP) server functionality.
Introduces Network Address Translation (NAT) and its function.
Guides users on configuring port forwarding for incoming service requests.
Details how to configure port triggering for dynamic service access.
Introduces Dynamic Domain Name Service (DDNS) for using a fixed domain name with a dynamic IP.
Introduces the firewall feature for protecting the network from unwanted traffic.
Introduces the remote management feature for accessing the device remotely.
Introduces bandwidth management for controlling network traffic and prioritizing applications.
Explains how to set up Quality of Service (QoS) rules for bandwidth management.
Guides users on setting the system name and changing the device password.
Guides users on viewing system logs, alerts, and error messages.
Introduces tools for firmware updates, configuration management, and system restarts.
Details the process of uploading new firmware to the NBG-418N v2.
Covers factory defaults, backup, and restoring configuration files.
Introduces the System Operation Mode settings.
Guides users on selecting the device operation mode (Router, AP, Repeater).
Addresses common issues and provides solutions for problems encountered with the NBG-418N v2.
Helps resolve problems related to accessing and logging into the NBG-418N v2.
Provides solutions for issues preventing internet access.
Explains how to reset the device to factory defaults to resolve persistent issues.
Offers solutions for common wireless connectivity and performance issues.
Explains Wi-Fi Protected Access (WPA) and WPA2 standards for wireless security.
Details WPA and WPA2 encryption methods like TKIP and AES.
To Next Page