Chapter 4 Modes
NBG-418N v2 User’s Guide
42
4.4.2 Universal Repeater Navigation Panel
Use the menu in the navigation panel to configure NBG-418N v2 features in Universal Repeater
Mode.
The following screen and table show the features you can configure in Universal Repeater Mode.
Figure 29 Menu: Universal Repeater Mode
- WPS This shows the WPS (WiFi Protected Setup) Status. Click the link to display
Network > Wireless LAN > WPS screen.
WLAN STA Information
- SSID This is the name of the selected AP that the NBG-418N v2 is associating with.
- Security Mode This shows the wireless security the NBG-418N v2 is using to connect to the
AP.
- Connection Status This shows whether the NBG-418N v2 is currently associated with the selected
AP.
System Status
Operation Mode This field shows the device operation mode: Router, Access Point, or
Universal Repeater.
System Up Time This is the total time the NBG-418N v2 has been on.
Current Date/Time This field displays your NBG-418N v2’s present date and time.
System Setting
Firewall This field shows the firewall status
UPnP This field shows the UPnP status.
Summary
DHCP table Use this screen to view current DHCP client information.
Packet Statistics Use this screen to view port status and packet specific statistics.
Message Use this screen to view the status of the NBG-418N v2.
Table 14 Status Screen (Universal Repeater Mode) (continued)
LABEL DESCRIPTION
To Next Page
Loading...
