ZyXEL Communications NBG-418N v2 - AP Navigation Panel

Chapter 4 Modes
NBG-418N v2 User’s Guide
38
The following table describes the labels shown in the Status screen.
4.3.2 AP Navigation Panel
Use the menu in the navigation panel to configure NBG-418N v2 features in AP Mode.
The following screen and table show the features you can configure in AP Mode.
Table 12 Status Screen (AP Mode)
LABEL DESCRIPTION
Device Information
System Name This is the System Name you enter in the Maintenance > System > General
screen. It is for identification purposes.
Firmware Version This is the current firmware version of the NBG-418N v2.
LAN Information
- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address This shows the LAN port’s IP address.
- IP Subnet Mask This shows the LAN port’s subnet mask.
- DHCP Server This shows the LAN port’s DHCP server status.
WLAN Information
- MAC Address This shows the wireless adapter MAC Address of your device.
- Status This shows the current status of the Wireless LAN - On, Off, or Off by scheduler.
- Name (SSID) This shows a descriptive name used to identify the NBG-418N v2 in the wireless
LAN.
- Channel This shows the channel number which you select manually or the NBG-418N v2
automatically scans and selects.
- Operating Channel This shows the channel number which the NBG-418N v2 is currently using over the
wireless LAN.
- Security Mode This shows the level of wireless security the NBG-418N v2 is using.
- 802.11 Mode This shows the IEEE 802.11 standard that the NBG-418N v2 supports. Wireless
clients must support the same standard in order to be able to connect to the NBG-
418N v2
- WPS This shows the WPS (WiFi Protected Setup) Status. Click the status to display
Network > Wireless LAN > WPS screen.
System Status
Operation Mode This field shows the device operation mode: Router, Access Point, or Universal
Repeater.
System Up Time This is the total time the NBG-418N v2 has been on.
Current Date/Time This field displays your NBG-418N v2’s present date and time.
System Setting
Firewall This shows the firewall settings on the NBG-418N v2.
UPnP This shows the UPnP
Summary
DHCP Table This shows the DHCP clients.
Packet Statistics Use this screen to view port status and packet specific statistics.