Chapter 6 Wireless LAN
NBG-418N v2 User’s Guide
72
Figure 50 Network > Wireless LAN > Scheduling
The following table describes the labels in this screen.
6.10 MBSSID Screen
Use this screen to set multiple SSID (MBSSID) for the wireless clients on the NBG-418N v2. Click
Network > Wireless LAN > MBSSID to open the following screen.
Table 25 Network > Wireless LAN > Scheduling
LABEL DESCRIPTION
Enable Wireless
LAN Scheduling
Select this to enable Wireless LAN scheduling.
Action Select On or Off to specify whether the Wireless LAN is turned on or off. This field works
in conjunction with the Day and Except for the following times fields.
Day Select Everyday or the specific days to turn the Wireless LAN on or off. If you select
Everyday you can not select any specific days. This field works in conjunction with the
Except for the following times field.
Except for the
following times
Select a begin time using the first set of hour and minute (min) drop down boxes and
select an end time using the second set of hour and minute (min) drop down boxes. If
you have chosen On earlier for the WLAN Status the Wireless LAN will turn off between
the two times you enter in these fields. If you have chosen Off earlier for the WLAN Status
the Wireless LAN will turn on between the two times you enter in these fields.
Note: Entering the same begin time and end time will mean the whole day.
Apply Click Apply to save your changes back to the NBG-418N v2.
Reset Click Reset to reload the previous configuration for this screen.
To Next Page
Loading...
