NBG-418N v2 User’s Guide
134
CHAPTER 18
Tools
18.1 Overview
This chapter shows you how to upload a new firmware, upload or save backup configuration files
and restart the NBG-418N v2.
18.2 What You Can Do
•Use the Firmware screen to upload firmware to your NBG-418N v2 (Section 18.3 on page 134).
•Use the Configuration screen to view information related to factory defaults, backup
configuration, and restoring configuration (Section 18.4 on page 136).
•Use the Restart screen to have the NBG-418N v2 reboot (Section 18.5 on page 138).
18.3 Firmware Upload Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a “*.bin”
extension, e.g., “NBG-418N v2.bin”. The upload process uses HTTP (Hypertext Transfer Protocol)
and may take up to two minutes. After a successful upload, the system will reboot.
Click Maintenance > Tools. Follow the instructions in this screen to upload firmware to your NBG-
418N v2.
Figure 97 Maintenance > Tools > Firmware
To Next Page
Loading...
