Chapter 18 Tools
NBG-418N v2 User’s Guide
138
18.4.3 Back to Factory Defaults
Pressing the Reset to default button in this section clears all user-entered configuration
information and returns the NBG-418N v2 to its factory defaults.
You can also press the WPS/RESET button on the rear panel to reset the factory defaults of your
NBG-418N v2. Refer to Section 1.4.1 on page 15 for more information on the WPS/RESET button.
18.5 Restart Screen
System restart allows you to reboot the NBG-418N v2 without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the NBG-418N v2 reboot. This does
not affect the NBG-418N v2's configuration.
Figure 105 Maintenance > Tools > Restart
To Next Page
Loading...
