ZyXEL Communications NBG-418N v2 - Client List Screen

Chapter 9 DHCP Server
NBG-418N v2 User’s Guide
98
Figure 68 Network > DHCP Server > Advanced
The following table describes the labels in this screen.
9.6 Client List Screen
The DHCP table shows current DHCP client information (including IP Address, Host Name and
MAC Address) of network clients using the NBG-418N v2’s DHCP servers.
Configure this screen to always assign an IP address to a MAC address (and host name). Click
Network > DHCP Server > Client List.
Note: You can also view a read-only client list by clicking the DHCP Table (Details...)
hyperlink in the Status screen.
The following screen displays.
Table 40 Network > DHCP Server > Advanced
LABEL DESCRIPTION
Static DHCP Table
IP Address Type the LAN IP address of a computer on your LAN.
MAC Address Type the MAC address (with colons) of a computer on your LAN.
Add Click Add button to add a new static DHCP entry.
Update Click Update button to see the updated DHCP Static IP table.
Delete Click Delete button to delete a static DHCP entry.
Reset Click Reset to clear the IP Address and MAC address box fields.
DHCP Static IP Table
Select Click the Select radio button to select a static DHCP entry.
IP Address This field displays the LAN IP address of a computer on your LAN.
MAC Address This field displays the MAC address of a computer on your LAN.
Apply Click Apply to save your changes back to the NBG-418N v2.
Reset Click Reset to begin configuring this screen afresh.