Chapter 4 Modes
NBG-418N v2 User’s Guide
31
6 A pop-up window appears providing information on this mode. Click OK in the pop-up message
window. Click Apply.
Note: Wait while the NBG-418N v2 restarts, then log in to the Web Configurator again.
The NBG-418N v2 IP address is now 192.168.1.1.
4.2.1 Status Screen (Router Mode)
The screen below shows the status screen in Router mode.
Figure 20 Status Screen (Router Mode)
The following table describes the icons shown in the Status screen.
Table 7 Status Screen Icon Key
ICON DESCRIPTION
Click this icon to open the setup wizard.
Click this icon to view copyright and a link for related product information.
Click this icon at any time to exit the Web Configurator.
To Next Page
Loading...
