Chapter 3 Dashboard
NAP Series User’s Guide
25
If the NAP cannot connect to the Internet or to NCC, an error message is shown on this screen, as in the
following.
Serial Number This field displays the serial number of the NAP.
Product Model This field displays the model name of the NAP.
2.4G Channel
Information
This field displays the channel number the NAP is using and its output power in the 2.4 GHz
spectrum. This shows Not activated if the wireless LAN is disabled.
5G Channel
Information
This field displays the channel number the NAP is using and its output power in the 5 GHz
spectrum. This shows Not activated if the wireless LAN is disabled.
Ethernet This field displays whether the NAP’s Ethernet port is connected and the IP address of the
gateway to which the NAP is connected.
Internet This field displays whether the NAP is connecting to the Internet.
Nebula
Connectivity
Status
This field displays whether the NAP can connect to the Zyxel Nebula Control Center (NCC).
Nebula Control
Center
Activation Status
This field displays whether the NAP has been registered and can be managed by the NCC.
Use Proxy to
Access NCC
This displays whether the NAP uses a proxy server to access the NCC (Nebula Control
Center).
Table 10 Dashboard (continued)
LABEL DESCRIPTION
To Next Page
Loading...
