ZyXEL Communications NAP102 - Navigating the Web Configurator; Title Bar Functionality

Chapter 2 The Web Configurator
NAP Series User’s Guide
15
5 Enter the user name (default: “admin”) and password (default: “1234”). If the NAP is being managed or
has been managed by the NCC, check the NCC's Site-Wide > Configure > General setting screen for
the NAP's current password.
6 Click Login.
2.3 Navigating the Web Configurator
The following summarizes how to navigate the web configurator from the Dashboard screen. This guide
uses the NAP102 screens as an example. The screens may vary slightly for different models.
Figure 5 The Web Configurator’s Main Screen
The Web Configurator’s main screen is divided into these parts:
• A - Title Bar
• B - Navigation Panel
• C - Main Window
2.3.1 Title Bar
The title bar provides some useful links that always appear over the screens below, regardless of how
deep into the Web Configurator you navigate.
Figure 6 Title Bar
The icons provide the following functions.
A
C
B
Table 4 Title Bar: Web Configurator Icons
LABEL DESCRIPTION
Logout Click this to log out of the Web Configurator.
Help Click this to open the help page for the current screen.
About Click this to display basic information about the NAP.