Chapter 3 Dashboard
NAP Series User’s Guide
19
5G Channel
Information
This field displays the channel number the NAP is using and its output power in the 5 GHz
spectrum.
Ethernet This field displays whether the NAP’s Ethernet port is connected and the IP address of the
gateway to which the NAP is connected.
Internet This field displays whether the NAP is connecting to the Internet.
Nebula
Connectivity
Status
This field displays whether the NAP can connect to the Zyxel Nebula Control Center (NCC).
Nebula Control
Center
Activation Status
This field displays whether the NAP has been registered and can be managed by the NCC.
Your Client Connection
Client IP This field displays the IP address of the wireless client from which you access the NAP’s web
configurator.
Client MAC This field displays the MAC address of the wireless client from which you access the NAP’s
web configurator.
AP Radio This field displays the number of spatial streams for the NAP.
Channel This field displays the channel number and channel bandwidth used by the connected
wireless client.
Current Tx/Rx
rate
This field displays the current transmission rate and reception rate of the connected wireless
client.
Signal This field displays the signal strength of the connected wireless client.
Table 7 Dashboard (continued)
LABEL DESCRIPTION
To Next Page
Loading...
