Chapter 9 Wireless
NBG7510 User’s Guide
105
Figure 54 Network Setting > Wireless > General
The following table describes the general WiFi labels in this screen.
Table 30 Network Setting > Wireless > General
LABEL DESCRIPTION
Wireless
Wireless Select Keep the same settings for 2.4G and 5G wireless networks and the 2.4 GHz and 5 GHz
wireless networks will use the same SSID and wireless security settings.
Wireless/WiFi Network Setup
Band This shows the wireless band which this radio profile is using. 2.4GHz is the frequency used by IEEE
802.11b/g/n/ax wireless clients while 5GHz is used by IEEE 802.11a/n/ac/ax wireless clients.
Wireless/WiFi Click this switch to enable or disable WiFi in this field. When the switch turns blue , the
function is enabled. Otherwise, it is not.
Channel Select a channel from the drop-down list box. The options vary depending on the frequency
band and the country you are in.
Use Auto to have the Zyxel Device automatically determine a channel to use.
To Next Page
Loading...
