ZyXEL Communications NBG7510 - Tutorials; 5.1 Overview; 5.2 Wired Network Setup

NBG7510 User’s Guide
37
C
HAPTE R
5
Tutorials
5.1 Overview
This chapter shows you how to use the Zyxel Device’s various features.
• Wired Network Setup
• WiFi Network Setup
• Network Security
• Device Maintenance
5.2 Wired Network Setup
This section shows you how to set up a wired connection.
5.2.1 Setting Up an Ethernet Connection
If you connect to the Internet through an Ethernet connection, you need to connect a broadband
modem or router with Internet access to the WAN Ethernet port on the Zyxel Device. You need to
configure the Internet settings from the broadband modem or router on the Zyxel Device. First, make
sure you have Internet access through the broadband modem or router by connecting directly to it.
1 Make sure you have the Ethernet WAN port connect to a modem or router.
2 Go to Network Setting > Broadband and then the following screen appears. Click Add New WAN
Interface to add a WAN connection.