Chapter 9 Wireless
NBG7510 User’s Guide
110
Figure 58 Network Setting > Wireless > Guest/More AP > Edit
The following table describes the fields in this screen.
Table 35 Network Setting > Wireless > Guest/More AP > Edit
LABEL DESCRIPTION
Wireless Network Setup
Wireless Click this switch to enable or disable the wireless LAN in this field. When the switch turns blue
, the function is enabled; otherwise, it is not.
Wireless
Network Name
The SSID (Service Set IDentity) identifies the service set with which a wireless device is associated.
Wireless devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain
the SSID through scanning using a site survey tool.
To Next Page
Loading...
