Chapter 22 Troubleshooting
NWA / WAC Series User’s Guide
210
In the Monitor > Wireless > AP Information > Radio List screen, there is no load balancing indicator
associated with any APs assigned to the load balancing task.
• Check to be sure that the AP profile which contains the load balancing settings is correctly assigned
to the APs in question.
• The load balancing task may have been terminated because further load balancing on the APs in
question is no longer required.
How do I remove the WAC6500 series indoor AP from its mounting bracket?
• Find the down arrow close to the Ethernet ports, then use a thin flat tool (for example, a flat screw
driver) to lift up a clip beneath the down arrow.
• Turn the WAC6500 series indoor AP counter-clockwise.
To Next Page
Loading...
