Chapter 16 LEDs
NWA5000 / WAC6500 Series User’s Guide
177
The following table describes fields in the above screen.
Table 83 Maintenance > LED > Locator
LABEL DESCRIPTION
Turn On Click Turn On button to activate the locator. The Locator function will show the
actual location of the WAC between several devices in the network.
Automatically extinguish
after
Enter a time interval between 1 and 60 minutes to stop the locator LED from
bliking. Default is 10 minutes.
Apply Click Apply to save changes in this screen.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
