EasyManua.ls Logo

ZyXEL Communications NWD2105 - Page 112

ZyXEL Communications NWD2105
189 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A Setting Up Your Computer’s IP Address
NWD2105 User’s Guide
112
6 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens.
Figure 81 Windows 7: Internet Protocol Version 4 (TCP/IPv4) Properties
7 Select Obtain an IP address automatically if your network administrator or ISP
assigns your IP address dynamically.
Select Use the following IP Address and fill in the IP address, Subnet mask,
and Default gateway fields if you have a static IP address that was assigned to
you by your network administrator or ISP. You may also have to enter a Preferred
DNS server and an Alternate DNS server, if that information was provided.
Click Advanced if you want to configure advanced settings for IP, DNS and WINS.
8 Click OK to close the Internet Protocol (TCP/IP) Properties window.
9 Click OK to close the Local Area Connection Properties window.
Verifying Settings
1 Click Start > All Programs > Accessories > Command Prompt.
2 In the Command Prompt window, type "ipconfig" and then press [ENTER].

Table of Contents

Other manuals for ZyXEL Communications NWD2105

Related product manuals