Chapter 4 Station Mode
NWD2105 User’s Guide
69
4.6.1 WPS: PBC (Push Button Configuration)
This screen allows you to use the WPS Push Button Configuration mode. See
Section 3.4.1 on page 42 for more information. Select WPS and PBC (Push
Button Configuration) in the Adapter screen. The following screen displays.
Figure 46 WPS: PBC (Push Button Configuration)
Press Start when you want to begin the WPS process. You must also press the
button on the other device within two minutes.
4.6.2 WPS: PIN - Use this Device’s PIN
This screen allows you to use the WPS Personal Identification Number mode, by
entering the NWD2105’s unique PIN in the configuration utility of the other WPS-
enabled device. See Section 3.4.2 on page 42 for more information. Select WPS
PIN - Use
the PIN
From the AP
or Wireless
Router
Select this to use the PIN (Personal Identification Number) WPS mode.
Use this option when you want to enter the PIN from another WPS-
enabled device in the NWD2105.
When you select this, the PIN - Use the PIN From the AP or
Wireless Router screen appears (see Section 4.6.3 on page 70).
Save Click Save to save the changes to the NWD2105 and return to the Link
Info screen.
Table 17 Adapter (continued)
LABEL DESCRIPTION
To Next Page
Loading...
