NWD2105 User’s Guide
75
CHAPTER 5
AP Mode
5.1 Overview
This section shows you how to configure your NWD2105 in AP Mode using the
Windows version of the ZyXEL Utility.
Note: Some features available in Windows XP or Windows 2000 are not available in
Windows Vista.
AP Mode allows you to set up a wireless network without using a pre-existing AP.
The following figure shows a sample AP network set up.
Figure 53 AP Network Example .
Here, the NWD2105 is installed on computer A and set to operate in access point
mode. Computer A provides an Internet connection to the wireless LAN, so
wireless stations B and C can access the Internet.
To Next Page
Loading...
