ZyXEL Communications NWD2105 - Page 67

Chapter 4 Station Mode
NWD2105 User’s Guide
67
5 This read-only screen shows a summary of the new profile settings. Verify that the
settings are correct. Click Save to save and go to the next screen. Click Back to
return to the previous screen. Otherwise, click Exit to go back to the Profile
screen without saving.
Figure 43 Profile: Confirm New Settings
6 To use this network profile, click the Activate Now button. Otherwise, click the
Activate Later button. You can activate only one profile at a time.
Note: Once you activate a profile, the ZyXEL utility will use that profile the next time it
is started.
Figure 44 Profile: Activate the Profile