ZyXEL Communications P-2000W_V2 - Page 20

ZyXEL P-2000W Quick Start Guide
! Phone Does Not Ring:
Ensure that the ring volume on the handset is turned up by using the Left Selector key
to enter the phone’s Menu. Use the Up and Down Arrow keys to go to menu
6. Settings., then menu 3. Ringer Volume. If the phone’s volume is on and turned up,
reboot your equipment as described in the Rebooting your Equipment section.
! Fast Busy Signal:
Reboot your equipment as described in the Rebooting your Equipment section.
! “Net failed” message
If the screen displays “Net failed”, the phone
cannot connect to your wireless network. Verify
you performed the steps in Sections 3 and 4
correctly, and verify your wireless router’s wireless
settings.
! “Not Registered” message
If the screen displays “Not Registered”, the phone
is connected to your network, but can’t reach
BroadVoice. Verify your Internet connection is up,
and your that BroadVoice account settings are
correct. See Section 2 for more information.
Page 20