ZyXEL Communications P-2000W_V2 - Setting up Broadvoice on Your Phone

ZyXEL P-2000W Quick Start Guide
2 Setting Up BroadVoice on your Phone
ZyXEL has partnered with BroadVoice to provide you with VoIP service, allowing you to make
and receive voice calls over the Internet.
UPC Code
! You will need the “MAC Address” from the phone for
your BroadVoice account, which can usually be found
on the bottom of the phone’s box near the UPC code.
The MAC address should begin with 00A0C5XXXXX
X
or 001349XXXXXX.
Otherwise, use these steps to get the MAC
address off the phone directly:
MAC Address
# Turn on the phone by holding down the Power/ End key
for two seconds.
Powering on can take from 30 seconds to two minutes.
# After powering on, on your P-2000W, press the Left
Selector key
to enter the menu options.
# Select 1.Information using the Left Selector key
.
Page 9