ZyXEL Communications P-320W User Manual (English)

Other manuals for ZyXEL Communications P-320W

User Guide215 pages

Specifications2 pages

Questions and Answers:

A
Andrew PonceJul 30, 2025
What to do if none of the LEDs turn on on my ZyXEL Communications P-320W?
- D
  David MaciasJul 30, 2025
  If none of the LEDs turn on when you turn on your ZyXEL Communications Wireless Router, ensure the power adapter is correctly connected to both the router and a working power source. Verify that both the router and the power source are switched on. Try turning the router off and on again. If the problem continues, it might be a hardware issue, and you should get in touch with your vendor.
N
Nicole HardinAug 4, 2025
Why can't I access the Internet with my ZyXEL Communications P-320W Wireless Router?
- M
  mallenAug 4, 2025
  If you cannot access the Internet using your ZyXEL Communications Wireless Router, ensure that the router is powered on and properly connected to the network. Verify your WAN settings, making sure you've entered the correct username and password. If you are using PPPoE pass through, confirm that bridge mode is enabled.
J
John SmithAug 9, 2025
How to fix cannot access ZyXEL Communications Wireless Router?
- C
  Christina MooreAug 9, 2025
  If you cannot access your ZyXEL Communications Wireless Router, remember that the password field is case-sensitive. Ensure you are entering the correct password with the proper capitalization. If you're still locked out, use the RESET button to restore the factory default configuration. This will reset all settings, including the password.
O
omillerAug 14, 2025
Why the LAN LEDs do not turn on my ZyXEL Communications Wireless Router?
- G
  guerreroanthonyAug 14, 2025
  If the LAN LEDs on your ZyXEL Communications Wireless Router do not turn on, check your Ethernet cable connections. Also, check for any faulty Ethernet cables. Make sure your computer’s Ethernet Card is working properly.
P
Patrick EdwardsAug 19, 2025
What to do if WAN LED is off on ZyXEL Communications P-320W?
- A
  Anthony KingAug 19, 2025
  If the WAN LED is off on your ZyXEL Communications Wireless Router, check the connections between the router's WAN port and your cable/DSL modem or Ethernet jack. Also, check whether your cable/DSL device requires a crossover or straight-through cable.
K
kellysmithAug 25, 2025
What to do if I cannot access the ZyXEL Communications P-320W from the LAN?
- M
  Miss Kayla Hernandez DDSAug 25, 2025
  If you cannot access the ZyXEL Communications Wireless Router from the LAN, and Any IP is disabled, ensure that the IP address and subnet mask of both the router and your computer(s) are on the same subnet.

ZyXEL Communications P-320W Specifications

General

Type	Wireless Router
Connectivity Technology	Wireless
Data Link Protocol	Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g
Frequency Band	2.4 GHz
Wireless Protocol	802.11b/g
Maximum Wireless Speed	54 Mbps
Security	WEP, WPA, WPA2
Encryption Algorithm	WEP, WPA, WPA2
Antenna	External
Wireless Standard	IEEE 802.11g
Ethernet Ports	4
WAN Port	1
Features	NAT, DHCP, Firewall
Power Supply	External