ZyXEL Communications P-330W Release Note

1/5
ZyXEL P-330W Standard Version
Release 1.8
Release Note
Date: May 14, 2007
Supported Platforms:
ZyXEL P-330W
Versions:
Firmware Version: V1.8
Notes:
1. Default LAN IP: 192.168.10.1.
2. Default username/password: admin/1234.
3. Randomize NTP server query priority at every boot-up time.
4. Firmware upgrade did not support FTP or TFTP utility.
5. Some Firmware upgrades reset the router’s configuration options to the factory
defaults. Before performing an upgrade, remember to backup you current
configuration first.
Modification in 1.8 | 05/14/2007
Convert version string from “1.8_b11” to “1.8”
Modification in 1.8_b11 | 05/14/2007
1. [BUG FIXED]
Fixed some certain Internet web pages stall issue.
2. [BUG FIXED]
Fixed WAN port disconnected issue under CM system.
3. [BUG FIXED]
Fixed NDS wireless connection compatibility issue.
4. [BUG FIXED]
Fixed WPA-PSK compatible issue with G-405.
5. [BUG FIXED]
Fixed the issue that UPnP can’t work after LAN interface rejoin it.
6. [FEATURE ENHANCED]
Supported compatible with XBOX Live connection.
7. [FEATURE ENHANCED]
Added “Release IP” and “Renew IP” buttons in “Connection Details” in DHCP
Client of WAN access type.
Modification in 1.7 | 08/10/2006
1. Convert version string from “1.7_b12” to “1.7”

ZyXEL Communications P-330W Specifications

Wireless Specifications

power output at 54Mbps	14.2 dBm
power output at 11Mbps	18.4 dBm
receive sensitivity at 54Mbps	-70 dBm
receive sensitivity at 11Mbps	-86 dBm
antenna gain	2 dBi

Hardware Specifications

LAN ports	Four 10/100Base-T Ethernet, full duplex RJ-45 connector with auto MDI/MDIX support
WAN port	One 10/100Base-T Ethernet, full duplex RJ-45 connector with auto MDI/MDIX support
power supply	12V AC, 800 mA

Operating Environment

temperature range	-10℃ to 55℃
humidity range	10% to 90% non-condensing