ZyXEL Communications P-660HN-51 - Set up a Wireless Network

P-660HN-51
5
Set Up a Wireless Network
You can set up a wireless network using the following methods:
Using Wireless Protected Setup (WPS)
Press the WPS button on the P-660HN-51’s front panel for more than 5
seconds to turn the WPS function on.
Follow these steps to add a WPS-enabled device to the wireless network
using the WPS/WLAN button.
Place the devices you want to connect near
one another.
Press the WPS button on the P-660HN-51.
The WPS light blinks.
Press the WPS button on a compatible
device within 2 minutes of pressing the
button on the P-660HN-51.
The WPS light on the P-660HN-51 shines
steadily when connected.
1
1
2
3