ZyXEL Communications P-791R V2 - Page 30

P-791R v2 Support Notes
incoming packets to the true destination behind SUA. After the required server
are configured in Web Configurator, Advanced Setup, Network -> NAT ->
Port Forwarding, the internal server or client applications can be accessed by
using the P-791R v2's WAN IP Address.
SUA Supporting Table
The following are the required Web Configurator, Advanced Setup, Network
-> NAT -> Port Forwarding for the various applications running SUA mode.
ZyXEL SUA Supporting Table
Required Settings in Port Forwarding
Port/IP
Application
Outgoing Connection
Incoming
Connection
HTTP None 80/client IP
FTP None 21/client IP
TELNET None 23/client IP
(and active Telnet
service from WAN)
POP3 None 110/client IP
SMTP None 25/client IP
mIRC
None for Chat.
For DCC, please set
Default/Client IP
.
Windows PPTP None 1723/client IP
ICQ 99a None for Chat.
For DCC, please set:
ICQ -> preference ->
connections -> firewall
and set the firewall time
out to 80 seconds in
firewall setting.
Default/client IP
ICQ 2000b None for Chat None for Chat
ICQ Phone 2000b None 6701/client IP
Cornell 1.1 Cu-SeeMe None 7648/client IP
White Pine 3.1.2 Cu-SeeMe
2
7648/client IP &
24032/client IP
Default/client IP
White Pine 4.0 Cu-SeeMe 7648/client IP &
24032/client IP
Default/client IP
30
All contents copyright © 2007 ZyXEL Communications Corporation.