P-791R v2 Support Notes
• Setup the P-791R v2 as a DHCP Relay
We could set the P-791R v2 as a DHCP Relay via menu 3.2 as below:
Or via the following command in CLI:
Ip dhcp enif0 mode relay
Ip dhcp enif0 relay server [Server IP Address]
7. SUA Notes
Tested SUA/NAT Applications (e.g., Cu-SeeMe, ICQ, NetMeeting)
Introduction
Generally, SUA makes your LAN appear as a single machine to the outside
world. LAN users are invisible to outside users. However, some applications
such as Cu-SeeMe, and ICQ will need to connect to the local user behind the
P-791R v2. In such case, a SUA server must be configured to forward the
29
All contents copyright © 2007 ZyXEL Communications Corporation.
To Next Page
Loading...
