8
6. To add another powerline device (C) to your network, connect it with
one of the powerline devices (A or B) already connected to your
powerline network (See steps 2 and 3 in this section).
7. If you disconnected your powerline devices from your computer or
modem (or any other networking product connected to your powerline
device) in step 1 of this section, you can now reconnect them.
If the HomePlug ( ) light is off, use the PLA-4xx
configuration utility (see the User’s Guide for details) to
detect all other HomePlug AV devices on your power line
network. Try plugging a second HomePlug AV device into an
adjacent socket (to your PLA-401 v3) and see if the
HomePlug ( ) light comes on.
Congratulations! This connects your powerline devices and any products
you have connected to your powerline devices, such as your home
computer or network modem.
A or B
A
B
C
To Next Page
Loading...
