Prestige 630 ADSL USB Modem
1-10 Installing Your Modem
1.5 Front Panel LEDs
The LEDs on the front panel of your modem indicate operational status. The table under the following
figure describes the LED functions.
Figure 1-9 Front Panel LEDs
1.6 Front Panel LED Descriptions
Table 1-2 LED Descriptions
LED FUNCTION DESCRIPTION
USB
USB Interface
and Modem
Power
Connection
This LED is off when the modem’s USB port is not connected or not
receiving power.
The LED is on when the USB is connected, receiving power, and the driver
software is installed.
This LED blinks during data transfer or whenever the ADSL link is up.
ADSL
ADSL Interface This LED is off when the software driver has not been installed or after you
click the Disconnect button in the CSA interface.
This LED is on when the ADSL link is up.
This LED blinks when the ADSL link is connecting or waiting to connect.
To Next Page
Loading...
