ZyXEL Communications Prestige 630 - Chapter 7 Modify TCP;IP Networking Options; 7.1 Windows 98 Procedure

Prestige 630 ADSL USB Modem
Modify TCP/IP Networking Options 7-1
Chapter 7
Modify TCP/IP Networking Options
This chapter shows you how to modify TCP/IP networking options.
TCP/IP settings are automatically set-up during the software installation process. Use the following OS
specific procedures to change TCP/IP settings (if necessary) when using the RFC 1483 driver. The
procedures detail statically assigned, as opposed to dynamically assigned, information.
Icon names in the Dial-up Networking and/or My Network Places windows may differ
from those specified in this chapter.
7.1 Windows 98 Procedure
Step 1. Click StartSettingsControl Panel and then double-click the Network icon.
Step 2. Use the Configuration tab to reach your TCP/IP networking properties.
Figure 7-1 Network Window - Configuration Tab
Then click Properties.
Select TCP/IP -
>ZyXEL USB ADSL
Modem (RFC1483
Mode).