Prestige 630 ADSL USB Modem
Modify TCP/IP Networking Options 7-3
Step 4. Use this window to add or remove gateways. Consult with your network administrator to
determine the appropriate addresses for your needs.
Figure 7-3 TCP/IP Properties Window - Gateway Tab
Step 5. Click OK to confirm changes and end this TCP/IP option modification session.
Step 6. Click Yes to restart your computer (if prompted).
7.2 Windows 2000 and XP Procedures
The procedures for modifying TCP/IP settings in Windows 2000 and XP are very similar, only the Windows
2000 screens are shown.
Step 1. For Windows 2000, click Start, Settings, Network and Dial-up Connections and right-click
Local Area Connection or the connection you want to configure and click Properties.
For Windows XP, click start, Control Panel, Network and Internet Connections and then
Network Connections. Right-click the network connection you want to configure and then click
Properties.
To add a new gateway:
type the address in the
New gateway field and
click Add. The new
gateway will appear in the
Installed gateways list.
Then click OK.
To remove a gateway
select it in the Installed
gateways list and click
Remove.
To Next Page
Loading...
