ZyXEL Communications Prestige 630 - Figure 2-2 Configure VPI and VCI in Windows 2000

Prestige 630 ADSL USB Modem
2-2 Modifying Dial-up Settings
In the Phone number field, type “p” followed by the VPI and VCI numbers separated by a comma; for
example “p8,35”.
Figure 2-2 Configure VPI and VCI in Windows 2000
Step 2. Click Dial in the Connect Dial-up Connection screen to use your new settings.
For PPPoA: Type
“p” and your VPI
and VCI numbers
separated by a
comma.
For PPPoE: Type
the service name
followed by @ if
the ISP provides
it and then the
server name (if
one is provided).
Click OK.