Chapter 6 Wireless
SBG3300-N Series User’s Guide
82
Enhanced
Multicast
Forwarding
Select this check box to allow the Device to convert wireless multicast traffic into wireless
unicast traffic.
Guest WLAN Select this to allow this SSID’s wireless clients to access the Internet but not directly
connect to the LAN or the wireless clients in any of the Device’s other SSIDs.
Access
Scenario
This displays when you make the SSID a guest WLAN.
Select External Guest to block the SSID’s wireless clients from communicating directly
with the SSID’s other wireless clients through the Device.
Select Home Guest to allow the SSID’s wireless clients to communicate directly with the
SSID’s other wireless clients through the Device.
Max. Upstream
Bandwidth
Specify the maximum rate for wireless traffic going to the Device from the wireless clients in
kilobits per second (Kbps).
Max.
Downstream
Bandwidth
Specify the maximum rate for wireless traffic going from the Device to the wireless clients in
kilobits per second (Kbps).
Security Level
Security Mode Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on this
wireless network. The wireless clients which want to associate to this network must have
same wireless security settings as the Device. After you select to use a security, additional
options appears in this screen.
Or you can select No Security to allow any client to associate this network without any data
encryption or authentication.
See Section 6.2.1 on page 75 for more details about this field.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 24 More AP: Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
