3. Go to the path where you can save the log file and view the log.
USB Device
Task . Store the system log on a USB device.
Step 1: Plug-in an external USB storage device and activate the USB storage service to
store the system log. USB storage devices with FAT16, FAT32, EXT2, or EXT3 file
systems are supported for connection to the USB port of the UAG4100. Also,
you have to set a disk full warning limit once the storage space is less than this
criterion.
Step 2: Check if the status of USB storage is ready at Monitor > USB Storage > Storage
Information.
To Next Page
Loading...
