117/255
Assign the L2TP users’ IP address range from 192.168.100.10 to 192.168.100.20 for use in the L2TP
VPN tunnel and select Allow L2TP traffic Through WAN to allow traffic from L2TP clients to go to
the Internet. Click OK.
Figure 163 Quick Setup > VPN Setup Wizard > Welcome > VPN Settings (L2TP VPN Settings)
This screen provides a read-only summary of the VPN tunnel. Click Save.
Figure 164 Quick Setup > VPN Setup Wizard > Welcome > VPN Settings (Summary)
Now the rule is configured on the ZyWALL/USG. The rule settings appear in the VPN >
L2TP VPN screen. Click Close to exit the wizard.
To Next Page
Loading...
