Chapter 36 Configuration
VMG1312-B10B / VMG1312-B30B Series User’s Guide
295
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the Device to
its factory defaults. The following warning screen appears.
Figure 154 Reset Warning Message
Figure 155 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your Device.
Refer to Section 1.6 on page 21 for more information on the RESET button.
36.3 The Reboot Screen
System restart allows you to reboot the Device remotely without turning the power off. You may
need to do this if the Device hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the Device reboot. This does not affect the
Device's configuration.
Figure 156 Maintenance > Reboot
To Next Page
Loading...
