ZyXEL Communications VMG1312 Setup Guide

1.
Router Set-up Guide - ZYXEL VMG1312 for FTTC
Connections
ZYXEL VMG1312-B10D
Router Setup for FTTC Connections
Contents
Router Logon ........................................................................................................................ 3
Configure Connection ........................................................................................................... 5
LAN/DHCP Setup……………………………………………………………………………………………………………….9
Wi-Fi .....................................................................................................................................11
Firmware Upgrade .............................................................................................................. 12
Remote Management ......................................................................................................... 14
SNMP ................................................................................................................................... 16
Support Contact Details ....................................................................................................... 18
Router Logon
Open a web browser on your PC or laptop and enter the following address: http://192.168.1.1
This will bring up the login screen for the router as seen below:
- it is recommended to connect DSL cable to DSL port behind the router first before starting the configuration of the router.Note

ZyXEL Communications VMG1312 Specifications

General

Model	VMG1312
Type	Wireless Router
Frequency Band	2.4 GHz
Wireless Data Rates	Up to 300 Mbps
Ethernet Ports	4 x 10/100 Mbps
Firewall	NAT, SPI
QoS	Yes
VPN pass-through	Yes
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Wireless Standards	IEEE 802.11b/g/n
WAN Ports	1
USB Ports	1
Wireless Security	WEP, WPA, WPA2
Antennas	2
Storage Temperature	-20°C to 70°C