Appendix B IP Addresses and Subnetting
WAP3205 User’s Guide
159
The following figure shows the company network before subnetting.
Figure 101 Subnetting Example: Before Subnetting
You can “borrow” one of the host ID bits to divide the network 192.168.1.0 into
two separate sub-networks. The subnet mask is now 25 bits (255.255.255.128 or
/25).
The “borrowed” host ID bit can have a value of either 0 or 1, allowing two
subnets; 192.168.1.0 /25 and 192.168.1.128 /25.
The following figure shows the company network after subnetting. There are now
two sub-networks, A and B.
Figure 102 Subnetting Example: After Subnetting
To Next Page
Loading...
