ZyXEL Communications WAP3205 - Connecting the WAP3205 (in Universal Repeater Mode) to an AP or Wireless Router

Chapter 8 Tutorials
WAP3205 User’s Guide
84
11 Select SSID_VoIP from the SSID drop-down list. Configure the screen as
follows. Click Apply.
12 Click the MAC Filter tab to configure MAC filtering for the SSID_VoIP wireless
network. Select SSID_VoIP from the SSID drop-down list and select Allow in
the Policy field. Enter the VoIP device’s MAC address in the Add a station Mac
Address field and click Apply to allow only the VoIP device to associate with the
WAP3205 using this SSID.
8.6 Connecting the WAP3205 (in Universal
Repeater Mode) to an AP or Wireless Router
If you have an access point or wireless router with Internet access deployed in
your network already, and you want to have wireless clients connect to the
existing AP or wireless router through the WAP3205, set the WAP3205 to universal