ZyXEL Communications XMG Series Quick Start Guide

Pack Contents
DoC
VMG8825-T50 Power Cable Ethernet Cable
Declaration
of conformity
Safety
Warning
Step 1
Hardware Installation
WAN
1-a
OR
LAN
POWER
ON
POWER
Use the Ethernet cable to connect from the blue WAN port on the router to
the ethernet port on the Optical Network Termination point (ONT).
Quick Start Guide
VMG8825-T50
Dual-Band Wireless AC/N WAN Gigabit Router
(Optional)
If you need any assistance please call us on 0333 0155156 or email help@digitalhomeuk.com
www.digitalhomeuk.com
Quick Start
Guide
1-c
1-b
Connect the power cable to the VMG8825-T50 and press the power button.
Note: It may take a couple of minutes to set up.
If using a wired connection, you can connect a computer to one of the LAN ports
as shown - using an Ethernet cable. We recommend CAT6 or above for optimum
performance.
1-a
1-c
1-b
ONT

ZyXEL Communications XMG Series Specifications

General

Manufacturer	ZyXEL Communications
Wireless	Yes
Firewall	Yes
Quality of Service (QoS)	Yes
Power Supply	12V DC, 1.5A
Operating Temperature	0°C to 40°C
Category	Network Router
LAN Ports	4
Wireless Standards	802.11ac
Security Features	SPI Firewall
Humidity	10% to 90% (non-condensing)