To Next PageTo Next Page
Need help?Do you have a question about the ZyXEL Communications XS3700 Series and is the answer not in the manual?
General| Brand | ZyXEL Communications |
|---|---|
| Model | XS3700 Series |
| Category | Network Router |
| Language | English |
Introduces the main features and applications of the Switch.
Provides instructions on how to install and connect the Switch.
Describes the front and rear panels, ports, and LEDs of the Switch.
Introduces the configuration and functions of the web configurator.
Describes screens for ZON Utility, Neighbor Management, and Port Status.
Guides users on configuring basic settings like system information and general setup.
Explains how to configure 802.1Q tagged and port-based VLANs.
Covers configuration of static MAC address forwarding rules.
Discusses MAC address port filtering based on source, destination, and VLAN.
Explains STP, RSTP, and MSTP protocols and their configurations.
Explains how to logically aggregate physical links for higher bandwidth.
Describes IEEE 802.1x and MAC authentication methods.
Guides on setting up port security to control access based on MAC addresses.
Shows how to set up time ranges for time-oriented features.
Explains how to configure packet classifiers and QoS.
Details how to configure policy rules for traffic treatment.
Introduces the queuing methods supported for traffic management.
Shows how to configure VLAN stacking on the Switch.
Covers configuration of various multicast features.
Describes how to configure authentication, authorization, and accounting settings.
Explains how to use IP source guard to filter unauthorized DHCP and ARP packets.
Shows how to configure the Switch to guard against loops on the network edge.
Explains how to configure VLAN mapping on the Switch.
Explains how to configure layer-2 protocol tunneling on the Switch.
Shows how to configure sFlow to monitor network traffic.
Describes how the Switch provides PPPoE termination server additional info.
Explains how to configure rate limits and actions for port errors.
Shows how to configure MAC pinning on the Switch.
Explains how to block traffic between ports in the same VLAN.
Shows how to configure the Switch to reduce power consumed by switch ports.
Introduces LLDP and its configuration.
Explains how to configure static routes.
Shows how to configure policy routing rules.
Explains how to configure Differentiated Services (DiffServ) on the Switch.
Explains how to configure the DHCP feature.
Explains how to configure and monitor Virtual Router Redundancy Protocol (VRRP).
Explains how to configure ARP settings.
Explains how to configure maintenance screens for firmware and configuration.
Describes how to control access to the Switch.
Explains the Diagnostic screen.
Explains the syslog screens.
Introduces cluster management.
Introduces the MAC Table screen.
Introduces the IP Table screen.
Introduces the ARP Table screen.
Introduces the routing table.
Introduces the IPv6 Path MTU table.
Shows how to copy settings from one port to other ports.
Introduces the IPv6 neighbor table.
Offers suggestions to solve problems encountered with the switch.
Introduces IPv6 protocol version 6.
Explains the format and abbreviation of IPv6 addresses.
Describes the DHCPv6 protocol for assigning IPv6 network addresses.
Explains the collection of addresses assigned to a DHCP client.
Describes the protocol used to discover other IPv6 devices and track reachability.
Provides copyright information for the publication.
States ZyXEL's liability policy regarding product use and changes.
Includes FCC and CE EMC statements and compliance information.
Lists important safety precautions for product usage and installation.
Details the environmental product declaration information.
